China effluent pump Manufacturers, Suppliers, Factory

A single stage double suction centrifugal pump is a common type of centrifugal pump that has two suction inlets, located on either side of the pump, that introduce fluid into the pump body through two separate suction lines. The main features of the pump are as follows: 1 Double suction structure: single-stage double suction centrifugal pump has two suction inlet, so that the fluid can evenly enter both sides of the pump body, reducing the impact on the axial force, improve the stability and efficiency of the pump.

An explosion-proof chemical pump is a type of pump designed to safely handle and transfer volatile or hazardous chemicals in potentially explosive environments. These pumps are specifically designed and constructed to prevent the ignition of flammable substances, which could lead to an explosion.

Acid and alkali resistant chemical pump is a widely used industrial pump, especially suitable for conveying a variety of acid, alkali, salt and organic solvents and other strong corrosive media, usually used in printing and dyeing chemical, environmental protection, electronics, food and other industries.

Hongzheng is a leading China KMC Type Chemical Magnetic Pump manufacturers. KMC chemical magnetic pump structure features: 1. Magnetic drive, no dynamic seal, no leakage problem; 2. The pump body and shell are formed as one body to avoid cracks; 3. High-precision magnet arrangement, reduce the gap between the rotor and the magnet, improve anti-interference;

Hongzheng is a leading China Vertical Pipeline Centrifugal Pump manufacturers. The pipeline pump is a vertical structure, the import and export caliber is the same, and located on the same center line, can be installed in the pipeline like a valve, compact and beautiful appearance, small footprint, low construction investment, such as the protective cover can be placed in outdoor use. The impeller is directly installed on the extended shaft of the motor, the axial size is short, and the bearing configuration of the pump and the motor is reasonable, which can effectively balance the radial and axial load generated by the operation of the pump, so as to ensure the smooth operation of the pump and the vibration noise is very low.

A Pulp agitator, also known as a pulp mixer, is an important device in the pulp manufacturing process, mainly used to stir and suspend the pulp to keep it in a uniform state and prevent the deposition of fibers during storage and transportation.