China acid chemical transfer pump Manufacturers, Suppliers, Factory

Pipeline centrifugal pump is a vertical structure, the import and export diameter is the same, and located in the same center line, can be installed in the pipeline like a valve, with installation foot, increase the stability of the pump, compact appearance, small footprint, low construction investment.

Double suction middle open pump is a common centrifugal pump, its structural characteristics and application range are as follows: Structural features: 1. Double suction inlet: double suction open pump has two suction inlet, located on both sides of the pump. This design allows the pump to produce counteracting forces on the inlet side, reducing radial and axial forces, and improving the stability and service life of the pump.

Find a huge selection of ZW Type Self-priming Pump from China at Hongzheng. ZW type self-priming non-clogging sewage pump is a new type of self-priming and sewage pump developed according to the structure and performance of ZX type self-priming centrifugal pump and QW type submersible sewage pump, drawing on the advantages of similar products abroad.

A Pulp agitator, also known as a pulp mixer, is an important device in the pulp manufacturing process, mainly used to stir and suspend the pulp to keep it in a uniform state and prevent the deposition of fibers during storage and transportation.

Hongzheng is a leading China Vertical Pipeline Centrifugal Pump manufacturers. The pipeline pump is a vertical structure, the import and export caliber is the same, and located on the same center line, can be installed in the pipeline like a valve, compact and beautiful appearance, small footprint, low construction investment, such as the protective cover can be placed in outdoor use. The impeller is directly installed on the extended shaft of the motor, the axial size is short, and the bearing configuration of the pump and the motor is reasonable, which can effectively balance the radial and axial load generated by the operation of the pump, so as to ensure the smooth operation of the pump and the vibration noise is very low.

Horizontal single-stage chemical pump structure characteristics: 1. The motor and pump body of the horizontal single-stage chemical pump are installed on the same axis to form an integrated structure. 2. The pump body is usually made of corrosion-resistant materials such as cast iron, stainless steel and titanium alloy, which can adapt to various chemical media.