JLP type Single stage centrifugal pulp pump Product overview The JLP single stage single suction centrfugal type paper pulp pump and the chemical pump are for satisfy the papermaking， the system thick liquid， the water treatment， the system sugar， the starch， the alkali recycling enterprise user technical process demand，
JLP type Single stage centrifugal pulp pump Model specification
JLP type Single stage centrifugal pulp pump Structure feature
1、This pump opens the door the structure after the single stage single suction cantilever， when the service does not need to
disassemble the pipeline.
2、Pump inlet and outlet flange according to 1.6MPa pressure design.
3、The impeller is three leaf blades or four half piece of open structure， the overflow channel enlarge， but transports smoothly reaches as high as 6% density fine pulp， and is suitable in includes the ration gas medium.
4、The impeller adopts precision casting and dynamic balance checking.
5、The wear-resisting board and the impeller gap may adjust through the pump body on adjuster bolt in outside， may cause between the impeller and the wear-resisting board maintains the constant gap， thus enhances the pump the use efficiency.
6、The axis seals mainly has the single end surface machine to seal adds the padding， does not need to add the cooling water the single end surface machine to seal， the padding seals the altogether three patterns， may selects according to the user demand and the actual use operating mode.
7、The impeller end uses the impeller bolt to add the lock washer fixedly， also prevented well when pump engine off， causes the impeller bolt as a result of the impeller reverse to fall off the phenomenon， guarantees the pump the security reliable movement.